| |
|
|
ST-40 & ST-45 - 4 PISTON CALIPER FOR FRONT & REAR
(4 piston kits with 380mm rotors use ST-45 calipers)
 |
- Made of Squeeze Forged* aluminum alloy
- ALL finished parts are 100% leak down and pressure tested to
2500 PSI
- ST-40 uses standard FMSI D372 pad (VIEW
PAD SHAPE)
- ST-45 uses standard FMSI D609 pad (VIEW
PAD SHAPE)
- Any combination of 8 piston sizes available to match kit to
vehicle application
- Differential piston sizes minimize pad taper
- Dust boots are standard
- Weight: 7.94 lb (3.6 kg) unloaded
- Same caliper used by top Speed® World Challenge and Grand-Am
Cup Teams
|
* Squeeze Forged means that pressure is applied during cooling. This
produces a beautifully finished, solid part without porosity.
ST-60 - 6 PISTON CALIPER FOR FRONT
 |
- Made of Squeeze Forged* aluminum alloy
- Patented,
bolt-in bridge minimizes caliper compliance for a firmer pedal
- Stiffest
6 Piston caliper currently on the market
- Uses standard FMSI D1247 pad (VIEW
PAD SHAPE)
- Can be used on rotors with outer diameter of 328-380mm
and thickness of 28-35mm
- ALL finished parts are 100% leak down and pressure tested to
2500 PSI
- Uses a popular pad shape readily available in over
15 street performance and race friction compounds
- Over 19 different piston
size combinations available to tune brake torque to the needs of each individual
application
- Differential piston sizes minimize pad taper for longer pad
life and a firmer pedal
- Dust boots are standard for reduced maintenance
|
* Squeeze Forged means that pressure is applied during cooling. This
produces a beautifully finished, solid part, without porosity.
ST-22
- 2 PISTON CALIPER FOR REAR KITS  |
- Made of billet aluminum
- All finished parts are 100% tested to a pressure of 2500 PSI
- Uses standard FMSI D961 Pad (VIEW
PAD SHAPE)
- 2 piston opposed design
- May be added to cars with existing front StopTech kits
- Piston size adjusted for the application, just like our front
calipers
- Dust boots are standard
- Weight: 4.4 lb (2 kg) unloaded
| ST-10 - 1 PISTON
CALIPER PARKING BRAKE FOR REAR KITS  |
- Made of billet aluminum
- Different levers to fit your stock parking brake cable
- Fits any rotor 28 through 32mm wide
- Single piston slider design
- Uses standard FMSI D377 Pad (VIEW
PAD SHAPE)
- Weight: 4.13 lb (1.9 kg) unloaded
|
| | |
